USB-Cable with Type-C Connector are cable assemblies for a fast data transmission and a power of 100W. The original concept of the USB organisation had the idea to cover a distance of up to 1m with straight connectors with or without screw lock.
Type-C cables are useful in many applications:
As an adapter Type-C to USB-A following USB 3.0 up to 5Gbit/sec.
As an adapter Type-C to Micro-B following USB 3.0 up to 5Gbit/sec.
As Type-C to Type-C cable following USB 3.0 up to 5 Gbit/sec.
As Type-C to Type-C cable following USB 3.1 up to 10 Gbit/sec.
As Type-C to Type-C cable following USB 3.2 up to 20 Gbit/sec.
As Type-C to Type-C cable following USB 4.0 up to 40 Gbit/sec.
Als Typ-C auf Typ-C Kabel im USB Standard USB 4.0 mit Datenraten bis 40Gbit/sec.
Depending on the source, two or four lanes may be used for a displyport signal.
Als Typ-C auf Typ-C Kabel zu Übertragung von Thunderbolt Signalen bis zu 40 Gbit.
As Type-C to X for Charging purpose
Non USB use for any application and signal
Meanwhile there are many versions which are described below.
These cables are fully according to the USB specification. Modifications with smaller outer diameter are possible and easy to be made with less copper. In this case the resistance will be higher and the voltage loss on the cable goes up. ElectronAix supplies to you custom solutions according to the requirement of your application
Type-C cables with a length up to 1,75m we can specify the full USB 3.2 capability but with limited power transmission.
When the length is more than 1,75m transmission rate goes down and voltage loss goes up. In such cases we can check with you, if you cables meet your requests.
Active Type C cables are equipped with a redriver in the connector. From outside the redriver is invisible. The power transmission is limited because otherwise the Voltage losses are getting too big. Beside this these cables fulfil all USB 3.2 requirements.
Active optical Type-C cables are available up to 70m and carry USB 3.2 and two Lanes Displayport Signals. They are usable for one way transmission and the receiver must supply a Voltage to the connector. The idea of theses cables is to connect an external monitor.
Type C Cbales are availbale with these types of connectors:
Type-C cables from ElectronAix are custom tailored for your application We are having solutions for many bending cycles, linear moves (dragchsin) and steel protected jackets to resist high physical pressure.
Kai Fröhlich, Your contact window for USB Typ-C Kabel:
"Just call or write to me. I will care for your request from the first clarification until the mass production. Our strength are lotssizes bigger than 100 pieces, You will receive a drawing for approval and samples for approval.
Deliveries will be 100% same as the samples: from the same production line and with the same raw material."
Examples of Typ-C Cable: