Female headers
Female headers are the perfect counterpart to your male headers ▼
ElectronAix provides you with the mating counterparts to all available pin headers with the most common pitch of 1.0mm, 1.27mm, 2.0mm and 2.54mm and of course any other pitch you use. Our female headers represent the female counterpart to establish a multi-pole connection.
This is possible due to the matching contact springs. A corresponding coding, i.e. arrangement of the contacts, plug-in housings or sockets, makes the connection tight and thus prevents faulty connections.
Female headers can be soldered to the PCB in two different ways, as a THT/THR version (Through Hole Technology/Through Hole Reflow) or as SMD version (Surface Mount Device).
In addition to the solder versions, there are options for a connection with wires and crimped terminals or flat ribbon cables. With an IDC socket (Insulation Displacement Connection), the fastening to a flat cable is done via insulation displacement of the isolation. These versions are suitable for a wire to board connection.
This is possible due to the matching contact springs. A corresponding coding, i.e. arrangement of the contacts, plug-in housings or sockets, makes the connection tight and thus prevents faulty connections.
Female headers can be soldered to the PCB in two different ways, as a THT/THR version (Through Hole Technology/Through Hole Reflow) or as SMD version (Surface Mount Device).
In addition to the solder versions, there are options for a connection with wires and crimped terminals or flat ribbon cables. With an IDC socket (Insulation Displacement Connection), the fastening to a flat cable is done via insulation displacement of the isolation. These versions are suitable for a wire to board connection.
ElectronAix female headers for stable board-to-board connection ▼
Female headers can be used in combination with male headers in many applications. The key advantages are the stable electrical connection, which can be released again if necessary.
Female and male connectors are the best choice when modules with electrical or electronic components must be replaced from time to time.
When several PCBs are to be stacked together on top of each other, dual entry female headers offer the best solution for board-to-board connections. Using stacking technology or sandwich technology, you can easily design the required connections. For different space and assembly situations, we offer female headers that can be plugged in from below or from above.
Female and male connectors are the best choice when modules with electrical or electronic components must be replaced from time to time.
When several PCBs are to be stacked together on top of each other, dual entry female headers offer the best solution for board-to-board connections. Using stacking technology or sandwich technology, you can easily design the required connections. For different space and assembly situations, we offer female headers that can be plugged in from below or from above.
Female headers made by ElectronAix – a perfect fit for your demand ▼
Our female headers are available in different versions. The standard female headers are catalogue articles whose specifications correspond to those listed in our data sheets.
In addition, we also supply customized female headers with an individual contact spring. The shape of the spring, the number of contacts or the strength of the spring can be manufactured according to your wishes and specifications. The housing can also be customized according to your specifications to meet tight space requirements.
ElectronAix female headers are available for top entry, bottom entry or dual entry. This provides freedom in circuit design. Depending on your requirements, our standard contacts have one, two or three contact points. This ensures the best solution regarding your costs and the desired contacting.
Further advantages of our range:
In addition, we also supply customized female headers with an individual contact spring. The shape of the spring, the number of contacts or the strength of the spring can be manufactured according to your wishes and specifications. The housing can also be customized according to your specifications to meet tight space requirements.
ElectronAix female headers are available for top entry, bottom entry or dual entry. This provides freedom in circuit design. Depending on your requirements, our standard contacts have one, two or three contact points. This ensures the best solution regarding your costs and the desired contacting.
Further advantages of our range:
- On request, you can receive a UL File Number (E-number) for the plastic components of the female headers. Approval and certification of your devices for the US market becomes simplified with this marking.
- All our products can be processed with infrared reflow soldering.
- If possible, we ship our products in tape and reel packing to keep your processing costs low.
Supply chain solutions for cable assemblies by ElectronAix ▼
SAP is our most important tool
We work with an ERP-system from SAP and map all flows of goods there, from the procurement of raw materials to the storage of raw materials, the inventories in our buffer warehouse in Aachen and all the way to the deliveries of your orders.
Our ERP-system thus combines all the functions we need for our business operations, ensuring maximum transparency, and data integrity.
Our ERP-system thus combines all the functions we need for our business operations, ensuring maximum transparency, and data integrity.
Documentation and data security
The most important information about the article life cycle is integrated into our ERP-system: Clarifications and technical changes are thus accessible and available at any time if required, for example during order entry.
To ensure the highest level of data security, our server is mirrored, and both servers are also housed in different fire protection areas. In addition, all data is backed up daily to a German cloud. An external partner keeps our firewall and virus scanner permanently up to date.
To ensure the highest level of data security, our server is mirrored, and both servers are also housed in different fire protection areas. In addition, all data is backed up daily to a German cloud. An external partner keeps our firewall and virus scanner permanently up to date.
Project planning and buffer storage
We have critical components in stock on site in Aachen. This gives us 100% control of material management and - flow. During the ramp up we can agree with you on buying critical parts from the BOM-List in advance. This supports a smooth project ramp up and maximum supply security for your benefit. It gives you more time to finalize the design of your assembly.
During the lifecycle we can keep a buffer stock of the critical components. This shortens lead times gives you flexibility.
In case of minimum order quantities e.g. for raw cable, we can arrange to keep the surplus in our factory for future orders.
During the lifecycle we can keep a buffer stock of the critical components. This shortens lead times gives you flexibility.
In case of minimum order quantities e.g. for raw cable, we can arrange to keep the surplus in our factory for future orders.
Origin of supply
We mainly work with companies that are based in Taiwan. There, we focus on a small number of experts. Most of them have production lines in China (Mainland). In recent years we have expanded our portfolio and can also offer you solutions for cable assemblies from Korea, Malaysia, Taiwan, Thailand and Vietnam.
20 years of experience, short time to market, high quality, testing and cleanliness ▼
Short time to market
Many years of experience, attention to detail and passion for our products will quickly help you to find the cable assembly with moulded connectors that is precisely tailored to your needs.
We aim to quickly provide you with helpful information, the right drawing and appropriate samples. This reduces your time to market. Our buffer stock of connectors, contact systems and cable assemblies help you to find a solution quickly and to achieve short delivery times.
We aim to quickly provide you with helpful information, the right drawing and appropriate samples. This reduces your time to market. Our buffer stock of connectors, contact systems and cable assemblies help you to find a solution quickly and to achieve short delivery times.
High Quality
ISO9001, ISO13485 and IATF16949 certified production lines are indicators of the high quality standard of our products and ensure your safety and satisfaction.
All products come from a largely automated process with automatic soldering and crimping and 100 percent electrical testing. Our distribution and logistics processes are certified according to ISO9001 and audited according to VDA.
All products come from a largely automated process with automatic soldering and crimping and 100 percent electrical testing. Our distribution and logistics processes are certified according to ISO9001 and audited according to VDA.
Tests
You require specific tests, such as bending cycles, lengths or test reports? If so, ElectronAix is the perfect partner for you. We will coordinate all details with you individually.
"Our strength are series from 1000 pieces. You will receive a drawing for approval, samples for approval and a one-off pre-series. The series products always correspond to the samples – they always come from the same production and always consist of the same material. Do not hesitate to contact us."
Your personal contact for female headers
Mr. Peter Stremmer
+49-241-18906-91
anfrage@electronaix.com
.png)
Contact form
Mr. Peter Stremmer
+49-241-18906-91 anfrage@electronaix.comContact form