Micro Coaxial Cables and Antennacables - smallest Pitch an highest Datarates

Micro Coaxial Cables are Connections with up to 50 micro coaxial wires.

The outer diameter (OD) of a micro coaxial wire is in the range of µm. E.g. the OD (outer diameter) of a wire AWG40 is 0,35mm or 350 µm. For wires AWG50, this dimension shrinks to 0,15mm or 150 µm. We are having assemblies with AWG46 to AWG40 under mass production.
The coaxial wires transmit data rates up to 20Gbit/sec. With the use of Twin Coax the signal’s runtime scew is down to a minimum which allows to transmit critical bus signals e.g. PCIe.
For the connection of “power” lines, the use of discrete wire is possible. AWG32 is a typical power wire.
ElectronAix supplies micro coaxial cable assemblies of all kind. We assemble all available connectors, for example I-Pex’s Cabline Series Hirose’s DF 36, JAE FI and many others.
Either you choose a standard product or we assemble a custom tailored solution following your request.

Mini-Antenna Cable are single Wire Mini-Coaxial Cables

Mini antenna cables are having wires with an outer diameter (OD) in a range from 0,67 to 1,7mm which are crimped to a connector.
ElectronAix delivers custom tailored antenna cables, at both ends assembled with a connectors or one end stripped an tinned or one end soldered to a WiFi-, Bluetooth-, NFC- or GSM antenna.
We mostly assemble I-PEX’s MHF or Hirose’s U.FL series.
 
 

Micro Coaxial Cables and Antenna Cables for industrial- medical- or automotive Applications

Mikro Coaxial – and antenna cables are used for the internal wiring in cameras, displays and fast data bus systems , for example PCIe – PCI Express. These applications are in devices for industrial, medical- and automotive applications. Due to the certifications of our production lines, we are able to supply to all market segments.
 

20 Years + Experience, short Time to Market, high Quality, Tests and Cleanliness 

Short Time to Market

Many years of experience, attention to details and passion for our business will support you to get the required cable assembly fast and precise. Our aim is, to provide helpful information fast, the correct drawing and samples right away. This helps you to reduce your time to market. A raw material management allows us to deliver products fast and with short lead times. 

High Quality

A ISO9001 and IATF16949 approved production as well as I-PEX approved products indicate the high quality level of our cable assemblies for your security. All cables are produced in high level automated production with auto soldering or crimping and machine dispension of glue for strain relief..

Tests and Cleanliness

You wish to have special test, for example the transmission rate or attenuation? This is no problem with ElectronAix, either with your or our testing adapter.
Due to our experience with automotive applications we can deliver clean products, following VDA.
 

Our Strength

Our strength are lot with more the 100 pieces: Electronaix provides a drawing for approval and samples for approval.  The products from mass production are always 100% the same as the samples. 

Your contact for Micro Coax Connections Mr. Kai Fröhlich +49-241-18906-966 to contact

Examples of micro coaxial cables, antennacables and antennas