Custom tailored LVDS-cable with crimp-style connectors
All cable assemblies with crimp-style connectors are produced according to a dawing. For mass production, you will receive always the same material from the same production line.
ElectronAix supplies custom tailored wire harness with these characteristics:
- Quality according to IPC620, from ISO9001 or TS16949-approved production
- Checking of the crimp connection with a cross section report
- 100% electrical test: open and short
- Assemblies with one connector are checked by auto CCD-inspection machine
- With UL-Material and/or from UL-approved production line
- With original connectors from Hirose, JAE etc.

Pic: Cross section report of a crimpterminal
We are having solutions for: - Wire harness with original connector made by JAE, Hirose, Molex, Tyco, JST, etc.
- Wire harness with cost down equivalent connector
- Wire harness with custom tailored EMI shield and EMI shield connection
- Wire harness with twisted pair
Our strength are lot sizes bigger than 1000 pieces.
You will get a drawing for approval, samples for approval and a one shot pilot lot.
The mass production always follows the sample 100%: always the same material, always the same production line.
Try us:
 | Your Contact for Custom tailored Con.. Mr. Peter Stremmer +49-241-18906-91 contact form |
Your contact is Peter Stremmer
+49-241-18906-91
Contact us!