FFCs with EMI shield are having a shield on both sides or a wrapped shield. The shield material is Al and non conductive to the outside.
There are two ways to connect the shield:
Version 1: FFC with shield connected by GND-Plate.
In this case the shield has a small outside conductive area. The termination requires a corresponding connector with separate GND-terminals, e.g. IRISO Auto-I-Lock, Hirose FH41/FH48 or I-PEX Evaflex.
Version 2: FFC with shield - individual wires connected to shield
To make the connection with shield and wire, the isolator is stripped in certain positions to connect the requested wires. It is possible to connect multiple wires to the shield. This soution is workable for all types of connectors, cost efficient and the connectors usually need less space than the version with GND-Termnals.
|Your Contact |
Mr. Timur Korkmaz