USB-Cable assemblies with Type-C connector and USB 3.1 by ElectronAix
ElectronAix produces all cables following a drawing. Doing it this way, you will always receive the same material and properties.
You can choose Type-C cables with these characteristics:
- Auto soldered Type-C-cable
- Type-C-Cable with UL-File-No.
- Type-C-Cable with TID-Certificate
- All cables with 100% electrical test (open / short)
- On request Type-C cables with TDR test
- Production process following IPC620
We are having solutions for
- Type-C cables for USB 3.1 Gen 1 and Gen 2, USB 3.1 20 Gbit/sec. or Thunderbolt 70 Gbit/sec.
- USB 3.1 cables for drag chain applications
- Type-C cables with low resitance to minimize voltage losses
- Type-C cables with integrated amplifier for distances >1m
- Type-C cables with custom tailored connection e.g. CAN-Bus for an internal wiring
- Type-C cable adapter e.g. Type-C to crimp style connetor
- Type-C cables with signal converter like USB to RS232
- Type-C cables super soft
- Type-C cables with textile coating
- Type-C cables in junction with Apple Lightning Connector with PPID
- Custom tailored packing for cost efficient handling in your production
- Custom tailored label
Together with you, we design the best solution for your application.
Our strength are lot sizes with more than 100 pieces.
You will get a drawing for approval and samples for approval. Mass production assures: always the same as samples.
Try us:
 | Your contact for Type-C connections Mr. Christian Franzen christian.franzen@electronaix.com +49-241-18906-95 to contact |